PRODUCT

Network Light Sensor with constant illuminance function MP-PENET

DETAIL

It is used for lighting energy-saving control or constant illuminance control in office buildings, museums, commercial centers, warehouses, factories, airports and other places.  
MP-PENET will automatically detect changes in the intensity of sunlight in the area in real time, and automatically send corresponding scene control commands to the MP network bus, and adjust the output brightness of the lamps.
Main feature: 
The network-type photo-detector MP-PENET is powered by the network, has the function of network bus communication, and the wiring is very simple.
The detector has a unique network address that can be manually set, which can precisely control a lamp or a group of lamps in a designated area.
After the detector is powered on, it will automatically scan the illuminance of the detected surface continuously, and store the detected illuminance value in the memory; at regular intervals (the time value can be set by the debugging software LightWorld, such as: 5 minutes) The detector automatically calculates the average value of illuminance value samples during this period and judges which control command should be sent to the MP bus according to the pre-programmed content; different illuminance sample average values will automatically trigger different network control command outputs.
The detector has automatic error correction and anti-interference ability (for example, if there is a light passing by nearby, and no action will be triggered), when it detects a significant change in the illuminance value, the detector will automatically reset the timing value to zero, and restart the timing and illuminance value sampling.
Several sampling time values and the desired constant illuminance value can be set through the MP debugging software LightWorld.
Detection range of illuminance value: 0-65000Lux
The current illuminance value (Lux) of each detection area corresponding to the network photo-detectors MP-PENET can be read out in the LightWorld software.
The network-type photodetector MP-PENET can be remotely locked/unlocked through the network via smart devices such as computers/touch screens/clock modules/control plates. (For example: during the daytime, the MP intelligent system automatically unlocks/enables the light detection function, and at night, the MP intelligent system automatically locks/cancels the light detection function).
Size: 95mm diameter, 45mm thickness
Voltage: 12VDC, can be powered by network cable, energy consumption is less than 1.5 watts
Weight: 0.5Kg